4cbc03ce ea09 488b 852f 46c1a220c20e


UberLatch for the Arduino bit

by renaudbedard

Published on March 7, 2015

A short & sweet Arduino sketch that allows you to do 2x, 4x and 8x time division all at once with an Arduino bit. Essentially saves you either 6 Latch modules, or 3 Latch modules and a bunch of Splits!

Feed a pulse or a square oscillator to the first input of the Arduino module (d0) and the D1, A5 and A9 outputs (analog outputs should be set as "analog", not PWM) will have respectively 2x, 4x and 8x time-divided pulses from the input.

In the video I used a bunch of modules that are not directly necessary for the sketch to do its thing. The basics are something to feed a beat, and something to process the latched timings.

Related Projects

Girl on Fire Tribute Parade

I combine a couple projects provided in the Little Bits booklets. This project uses Legos (small base plates, two sets of whe...

#ChainReaction Bell

Here Jordi and Lucía. We've made a very special bell for the door. When you push the bell button, something magical begins ...


Caprica create a brand new appliance : Caprilost . Your’e probabbly tired of loosing all your stuffs , never again thanks to our ...