-
Orangemodule

invention

Strobe Whizzer

by ross_12061

Published on August 19, 2014

Spinning disc & strobe. Don't do this if you suffer from epilepsy or seizures.

Credits: Sophie (aged 8)

How To Make It

STEP 1

Draw a circle on a piece of thin card, approx 3" (8cm) across. Draw a colourful picture inside the circle, then cut it out with scissors.

STEP 2

Use the Blu-Tak to stick the picture to the fan (rotating side)

STEP 3

Assemble the circuit: power -> Pressure sensor -> branch. On one side of the branch add the slide dimmer -> fan. On the other side, do pulse -> wire -> Long LED1 -> Long LED2

STEP 4

Test your circuit by pressing the Pressure Sensor pad. The pulse should be on its fastest setting, adjust with the small screwdriver if needed.

STEP 5

Aim the LEDs at your picture, press the pressure sensor pad and adjust the fan speed with the slide dimmer. Try it in a darkened room for best results.

Related Projects

Auto cabinet light

This light turns on automatically when you open the cabinet. The roller switch is turned on the  open mode so when the c...

Stop that scratching, kitty!

Our cat loves to destroy our couch by scratching like crazy. But not anymore because of the "Anti-Kratz-Alarmanlage" (anti-scratch...

Camera for Ghosts #hackhalloween

This camera where specially made to capture ghosts spectrum, this  is the top edge of the technology.Ghost Busters must have ...