850ecd04 0bfa 4899 a969 71fb370df5af


Quacky the Duck

by the three J's and S

Published on October 26, 2015

Yellow duck with orange bill that has an annoying quack when you pinch his bill.  His forehead also lights up when he quacks.

Duration: 15-20 minutes

Credits: the two J's

How To Make It

STEP 1 : how to build Quacky's circuit

Eabf21e9 abb0 43fc 9f3a 2b6eb77c9479

Connect the power outlet p1 with the 9v battery. Snap on the pressure sensor i11 then snap on the branch w2. From the side of the branch w2 connect a long led o2. From the front of the branch w2 attach a vibration motor 04. Place the circuit on a mounting board.

STEP 2 : how to build Quacky

10f92774 b7f0 4264 a0f9 144ea935975f

52f0328f b808 49be bec1 71f354a671e0

pressure sensor attached to bill.

You'll need yellow and orange construction paper, scissors, sharpie marker and a pencil. Draw a duck's head. Make a slit for the bill. Cut bill to size. Slide bill through slit. Under the bill slit, slide the pressure sensor through and position so that you can pinch it when you pinch the bill. Tape the long led light behind the forehead of the duck.

Related Projects

A car wirelessly controlled by sound level

A basic RC car, that goes forward when its command detects a certain amount of sound. Or, to say it another way, a car that runs a...

#BitOlympics Challenge: Football by Fun Robotics, @littlebits

Welcome again ladies and gentlemen!This is the littlebits robotic soccer done by two cloud bits; one to read your leg's motion to ...

Object Detector

The purpose is to sense any object near the light sensor and then make the motor turn and buzzer buzz.  This can only be used...