Police Lights with DIY littleBits

February 8, 2014
With a marker cap and this circuit, you can instantly turn your toy car into a police car. 

Check out the video to see the circuit in action! 



Credits: http://www.instructables.com/id/DIY-littleBits-Introduction/

How To Make It

STEP 1

Assemble the circuit like this: power + pulse + wire + rgb led + inverter + long led .

STEP 2

Using your screwdriver, set the pulse to a fast blink rate.

STEP 3

Set the rgb led to either blue or red.

STEP 4

Put a red or blue marker cap on the long led.

STEP 5

Hide the power and pulse inside the car if you can. Gently use zip ties or glue dots to place your flashing police lights on top of your car.

STEP 6

Voila! You are now the police. Roll into the room like you mean business.

Related Projects

The Lazy Can Top Opener

When properly set up, this contraption can open a can only by flipping the power switch, saving you about 3 seconds.It can open no...

Conveyor-belt

This is Quinn's second project: a conveyor-belt.He explains in Dutch: "I've used the on/off switch, the motor, dimmer, and the red...