4cf622fd 40a0 47cf 819f f42d04fe2617


Mini Pops drumcomputer

by f.j2

Published on January 23, 2017

Mini Pops drumcomputer based on the BeatBox invention by Pjd.

this project can be found here : http://littlebits.cc/projects/arduino-lo-fi-80s-drum-machine

So, what has changed here ?

  • Start Stop switch of the rhytm box
  • Fresh new patterns and sounds, sampled from the Korg Mini Pops
  • Sync output for sequencers

For the project to work as expected, 2 modules have to be made from the HDK ( Hardware Development Kit ). These modules are a low pass filter ( designed by jpd ) and a voltage drop regulator ( this rejects noises and humming ).

For the sync output, we need a optocoupling circuit ( made of standard littlebits modules ), separating the 2 working voltages.

Duration: 1 hour

How To Make It

STEP 1 : Making the filter and power reduction bitsnaps

9fa0dcab 9f8f 4b42 9235 2ddc05f8e997

D47727a1 dabe 4785 aba9 2cc844a89181

You can use perfboard and bitsnaps to make a permanent bit or you can use the protobit and wire the few components on this bit. The circuit is very simple. Info on the filter circuit can be found here : http://littlebits.cc/projects/arduino-lo-fi-80s-drum-machine

STEP 2 : Assemble the circuit without the optocoupler circuit

1355aa55 d555 4407 8da9 427e061517d6

Assemble the circuit as seen in the picture, later on we will add the optocoupler circuit.

STEP 3 : Download all files to your computer

Connect the power supply to the fork and connect the arduino bit to the PC using a USB cable. Open the arduino sketch and upload it to the arduino bit Once uploaded, you should hear the Mini Pops drumcomputer.

STEP 4 : Assemble the optocoupler circuit

9e7b671b 9177 48de 9649 5558ad3c6635

3b361a80 e139 42f1 a4a6 872ffde17255

This circuit separates the 5V from the 4.6V. We need to tape a wire to the input of the Bright LED bit We also need to tape a wire from the split to the input of the Light sensor bit. Set the threshold to clockwise max. and set the switch to Light Tape a wire to the output of the Light sensor bit. This wire can be connected to a sequencer. Tape the 2 bitmodules ( Bright LED & Light sensor ) together, so the LED shine on the Light sensor bit. Cut out a cardboard box to surround this circuit to avoid surrounding light.

STEP 5 : Use the split wire and sequencer out

Connect the input of the split wire to the Power bit. One output goes to the optocoupler circuit from above The other output goes to the proto bit before the fork. The output wire from the optocoupler circuit can be fed into a sequencer or other circuit. The choice is up to you ...

Related Projects

#SNAPTOIT Mini Rotating Fan

Need a small fan to cool your maker space or workbench? You should put together the mini rotating fan! Using just a few bits from ...


Cor-A-finidad is a game. There are two controllers, each one represents a half heart. Both of them contain one button, one LED whi...

Wireless Animatronic Skull #HackHalloween

A scary hand puppet that I can control remotely.#HackHalloween