4f1c2ddb 19d3 468d 90a0 d58d339c13a5

invention

Keyboard Prank

by RonDagdag

Published on August 1, 2016

Prank your friends with Littlebits Arduino. Every 15 seconds, this program would press backspace and replace it with a smiley face. Hide it behind the computer or monitor, plug this to the USB port and enjoy! To disable/reprogram, disconnect wire or press the button

WARNING: This program can mess up someone's work. Proceed with caution

 

Duration: 1

How To Make It

1

Install the Software Download the Arduino Software to your computer. download the Arduino software from arduino.cc

2

Download the sketch Run Arduino. Create a new sketch. Copy and paste this code in Arduino IDE. here's the link https://gist.github.com/rondagdag/d4c0d23fdb0aacc6d361424ba386845b

3

Connect the Arduino Connect the micro USB cable into both Arduino Module and a USB port on your computer. Connect the button and the power battery too.

4

Arduino In the Arduino Program, select your board. Go to Tools > Board > Arduino Leonardo.

5

Port Next select the serial port that the Arduino will communicate over. Go to "Tools" > "Port" On Mac it would start with /dev/tty.usbmodem.... on PC it will start with COM.

6

Upload the Sketch To upload the Arduino sketch, press the arrow button in the top left corner of the window. At the bottom, the window will say "Compiling" then followed by "Uploading..." Two yellow lights will flash on your Arduino bit. Upload is complete when you see "Done Uploading", the program will start running right away.

7

Plug this to any computer Now you can plug this to any computer and the arduino module would be detected as a keyboard. It may mess up somebody's work. Beware.

Related Projects

Arduino Basics 3

You light up my life.Ok as we level up our skills we'll talk less and code more!This program will let us light up our bargrap...

Birthday Challenge - Drawing Robot

Happy 5th Birthday Little Bits! This Birthday Robot can write happy B-Day and much more.  To make this we used little bits pi...

#BitOlympics Ribbon Dancer

My project is a ribbon dancer that twirls around on a popsicle stick base while shaking her ribbon after a fanfare is played.