Congratulations...You Played Yourself

by arjun_littleBits

Published on April 1, 2016

"Don't ever play yourself" -DJ Khaled.

Use Bits from the Gizmos & Gadgets Kit & the Smart Home Kit to set up a motion triggered prank to make any unsuspecting prankee play themselves.

"They don't want us to Rick Roll you"

Duration: 30 min

How To Make It

STEP 1 : Set up motion triggered circuit

5004a36c 0ad6 410c 813f 5861c3d49913

Picture 1

The circuit on the wall is activated using the littleBits motion trigger. On a mounting board, connect a power to a motion trigger, then split the signal, one end going to a wireless transmitter and the other end going to an mp3 player and a speaker. I've attached the mp3 of Khaled + Rick Astley.

STEP 2 : Set up servo-powered confetti dropper

Ab20aa8f b579 4cb4 9d95 1c4f832c5770

Picture 1

The motion trigger will send signal to the wireless transmitter which will tell the receiver to turn the servo. On a mounting board, connect a power to a wireless receiver, then to a servo. Use the servo mount to place the motor onto the board. Attached the servo hub & arm to the motor and stick a cup at the end. You can use whatever material you want to fall on your victim: confetti, water, glitter, tar, dirt, slime, diet mountain dew, origami elephants, spiders. You name it!

STEP 3 : Hide a camera and wait

The motion trigger will play your mp3 & then the servo will drop whatever you want onto your victim. Record your prank and upload it to the littleBits projects page!

Related Projects

scratch2 OFFLINE

littleBits extension for Scratch 2.0 OFFLINE, https://github.com/electronicadivertida/scratch2LittleBits/tree/masterConnect little...

Solar powered outdoor toy sink

We had a Little Tikes toy sink with a manual pumping faucet which was tiresome to do after a while. So, to make it easier to play ...

servo motor recorder

its the same as the one for arduino except A. no code B. no arduino C. much easier to make it you need to put ...